Call: 01524 846 445 | Email: sales@foodsafetydirect.co.uk

UK Stock | Fast Dispatch | FREE UK Shipping

Supermarket Fridge Cyberattacks: How UK Food Businesses Can Manage Temperatures Manually

Supermarket Fridge Cyberattacks: How UK Food Businesses Can Manage Temperatures Manually

Simon Blackburn |

Cyberattacks targeting supermarket refrigeration systems across Europe have prompted a major security operation in the UK, with thousands of refrigeration controllers disconnected from the public internet. For food businesses relying on automated temperature monitoring, the incidents raise an important question: how can chilled and frozen food be monitored safely when connected systems are unavailable?

On 20 November 2026, the BBC reported that tens of thousands of commercial fridges and freezers had been secured as part of a coordinated operation involving cybersecurity specialists, government agencies and the food industry.

Some businesses were instructed to disconnect refrigeration controllers from the internet, while staff were required to monitor temperatures manually. The refrigeration equipment itself did not necessarily stop working. In many cases, disconnecting a controller from the public internet was a protective measure intended to prevent unauthorised remote access.

However, where businesses lost access to remote monitoring, alarms or centralised temperature records, they needed alternative arrangements to maintain effective food safety controls. The incidents highlight an important vulnerability in modern food operations. Refrigeration systems may be increasingly sophisticated, but businesses still need a reliable way to verify temperatures independently, recognise problems and record corrective action.

What Happened to Supermarket Refrigeration Systems?

The attacks began attracting attention in October 2026 when hundreds of supermarkets and food processing sites in France experienced interference with their refrigeration controls. Attackers reportedly accessed internet-connected controllers and manipulated refrigeration settings, including forcing equipment into defrost cycles. Temperatures increased, resulting in significant food losses and disruption. A further wave of incidents occurred on 1 and 2 November, affecting supermarkets and other facilities across several European countries, including Belgium, Luxembourg and Sweden.

The attacks demonstrated how a vulnerability in a relatively small piece of control equipment could have consequences across an entire food business. A modern supermarket may operate dozens of refrigerated cabinets and freezers, with their settings, alarms and temperature information managed through a central control system. If an attacker gains access to that system, the consequences can extend beyond the loss of digital records. Refrigeration settings may be changed, cooling interrupted and food exposed to temperatures outside safe operating limits.

UK Refrigeration Security Operation – November 2026

Cybersecurity researchers identified vulnerabilities in widely used refrigeration controllers. Thousands of controllers responsible for tens of thousands of refrigeration units were disconnected from the public internet while security specialists worked with manufacturers and businesses to deploy fixes.

The National Cyber Security Centre also supported potentially affected organisations and shared advice with the food and retail sectors. The issue was not confined to supermarkets. Warnings extended to convenience stores, restaurants, fast-food chains, hotels, food manufacturers, warehouses and other businesses using connected refrigeration equipment.

Taking Refrigeration Systems Offline Does Not Mean Switching Off the Fridges

One important distinction has been overlooked in some discussions of the attacks. Disconnecting a refrigeration controller from the internet is not necessarily the same as switching off the refrigeration equipment. Commercial refrigeration systems can often continue operating locally without an external internet connection.

However, the functions available after disconnection depend on the equipment and how the monitoring and control systems have been configured. A business might retain local temperature displays and alarms but lose remote notifications, centralised dashboards or access to historical records. In other installations, disconnecting a controller could affect more functions, making it essential to follow the manufacturer's or refrigeration engineer's instructions.

What Could Change When a Controller Is Disconnected?

  • Cooling: Refrigeration may continue operating normally through local controls.
  • Remote monitoring: Central temperature dashboards may become unavailable.
  • Alarms: Remote alerts may stop working, even if local alarms remain operational.
  • Temperature records: Historical information may become inaccessible or incomplete.
  • Manual checks: Staff may need to increase the frequency of independent temperature checks.

The immediate food safety concern is therefore not simply whether the fridge is running. It is whether the business can still verify that the food inside remains at an appropriate temperature. A refrigerated cabinet may appear to be operating normally while its temperature is gradually increasing. Without functioning alarms or regular checks, a problem may go unnoticed until food has already been exposed to unsuitable conditions.

Manual Temperature Monitoring Becomes Essential When Automated Systems Are Unavailable

Food businesses should have contingency arrangements for situations where automated monitoring systems become unreliable or unavailable. This includes cyber incidents, network failures, power interruptions, faulty sensors and equipment breakdowns.

Manual monitoring provides an alternative way to check refrigeration conditions, but it must be organised properly. A suitable temporary procedure should establish which equipment requires checking, who is responsible, how temperatures will be measured, how frequently checks will take place and what action is required if a problem is identified. It should also identify any periods when temperatures were not monitored, rather than assuming that food remained safe because a later reading was satisfactory.

The key principle: The objective is to maintain an effective system of temperature control, not simply to complete a paper record.

Choosing the Right Thermometers for Manual Fridge and Freezer Checks

Different types of thermometer serve different purposes. During a monitoring-system outage, using the appropriate equipment can make the difference between obtaining a useful reading and recording information that does not establish whether food is safe.

Fridge and Freezer Thermometers

A dedicated fridge or freezer thermometer provides a straightforward way to monitor the temperature inside refrigeration equipment. These may be analogue dial thermometers, liquid-filled thermometers or digital devices with an external sensor.

They are useful because they operate independently of the refrigeration controller, provided they do not rely on the same compromised system. A thermometer can be positioned inside a cabinet or cold room to provide a local temperature reading.

However, an air-temperature reading is not necessarily the same as the temperature of the food. Air temperatures can change quickly when doors are opened or during normal refrigeration cycles. Food temperatures generally respond more slowly. For that reason, air-temperature checks should be supported by appropriate food or between-pack measurements when necessary.

Digital Probe Thermometers

Digital probe thermometers provide a more direct way of checking food temperatures. A clean, disinfected probe can be inserted into suitable food to measure its internal temperature. Where opening packaging or penetrating food would be inappropriate, the FSA also recommends checking between packs of chilled food.

Between-pack measurements can provide useful information without damaging products, although they may not give exactly the same reading as the centre of the food. Probe thermometers are particularly useful when a fridge reading is unexpectedly high, equipment has malfunctioned or there is uncertainty about whether products have remained adequately chilled. Probes must be cleaned and disinfected appropriately between uses to avoid cross-contamination.

Infrared Thermometers

Infrared thermometers allow staff to take quick, non-contact surface temperature readings. They can be useful for screening products and identifying areas that may require further investigation.

However, they measure surface temperature rather than the internal temperature of food. Their readings can also be affected by the surface material, measurement distance and environmental conditions. An infrared thermometer should therefore not be relied upon alone to establish that chilled or frozen food has remained safe following a refrigeration failure.

Independent Temperature Data Loggers

Battery-powered temperature data loggers offer another option, particularly where staff cannot continuously supervise refrigeration equipment. A standalone logger can record temperatures at predetermined intervals and retain a history of readings independently of the main refrigeration control system.

This can be particularly valuable overnight, when a manual check at closing followed by another at opening may leave a lengthy period without recorded information. However, businesses must confirm that the logger genuinely operates independently. A device using the same affected network, controller or cloud platform may not provide the resilience required. A suitable logger should also have sufficient battery life, memory capacity and an appropriate temperature range for the application.

What Temperatures Should Food Businesses Maintain?

The Food Standards Agency recommends setting commercial fridges at 5°C or below to help ensure that chilled food remains at a safe temperature. In England, Wales and Northern Ireland, food that requires temperature control must generally be kept at 8°C or below, subject to applicable exemptions and limited permitted periods outside temperature control.

The 8°C figure is a legal threshold for relevant chilled foods, not the recommended operating temperature for a fridge. Setting refrigeration equipment at 5°C or below provides a margin for normal fluctuations. For frozen storage, maintaining food at -18°C or colder is established good practice, although the applicable legal requirements depend on the food and circumstances.

Storage Condition Temperature Requirement or Guidance
Chilled food 8°C or below General legal requirement for relevant foods in England, Wales and Northern Ireland, subject to exceptions
Fridge operating temperature 5°C or below FSA recommendation
Frozen food storage -18°C or colder Established good practice; specific legal rules apply to some products

Food businesses must also follow any stricter storage conditions specified by manufacturers, suppliers or their own food safety management procedures.

How to Carry Out Manual Refrigeration Temperature Checks

Where automated monitoring has been lost, businesses should introduce a documented procedure appropriate to the number of refrigeration units, the food stored and the level of risk.

The following process provides a practical starting point.

1. Identify Every Affected Refrigeration Unit

Create or update a list of fridges, freezers, chilled display cabinets and cold rooms requiring manual monitoring. Each unit should have a clear identification number or name so readings can be linked to the correct equipment.

2. Establish a Reliable Starting Temperature

Use an appropriate independent thermometer to check the temperature inside each unit. Where there is any doubt about the condition of the food, carry out suitable product or between-pack temperature checks. Do not rely solely on a controller display if the controller itself may have been compromised.

3. Agree a Monitoring Frequency

The FSA's Safer Food, Better Business guidance recommends checking refrigeration temperatures at least once daily, starting with opening checks. However, a business temporarily operating without automated monitoring may need considerably more frequent checks. For example, checks every two hours during trading could be a sensible temporary arrangement for some operations, but this is not a universal legal requirement or an FSA-prescribed interval.

The frequency should be determined by the food safety risk assessment, taking account of the type of food, equipment reliability, previous temperature history, ambient conditions and whether alarms remain operational. Where there is no overnight monitoring, additional controls may be necessary, particularly for high-value or high-risk stock.

4. Record the Actual Temperature

Staff should record the temperature measured, rather than simply ticking a box to indicate that a check was completed. The record should identify the unit, date, time, reading and person carrying out the check. It should also distinguish between air-temperature readings, between-pack measurements and direct food-temperature measurements.

5. Investigate Unusual Readings Immediately

An unexpected temperature increase should trigger further investigation. Staff should check whether doors have been left open, whether the equipment is operating correctly and whether food temperatures are affected. If necessary, potentially affected stock should be isolated while its safety is assessed.

6. Record Corrective Actions

Where a problem is identified, document what happened, what was checked, what action was taken and how the outcome was verified. This creates a useful record for management review and helps demonstrate that temperature-control problems are being addressed rather than merely observed.

What Should a Manual Fridge Temperature Log Include?

A manual temperature log does not need to be complicated, but it should provide enough information to establish what was checked and whether action was required.

For example:

Date / Time Unit Temperature Checked By Action
20/11 – 08:00 Fridge 01 3.4°C AB None
20/11 – 10:00 Fridge 01 4.1°C CD None
20/11 – 12:00 Fridge 01 6.2°C AB Investigated; product temperatures checked
20/11 – 14:00 Fridge 01 4.3°C CD Rechecked; investigation documented

Illustrative readings only. The example assumes air-temperature measurements. A fridge air reading above 5°C does not automatically establish that the food has exceeded 8°C, but it warrants appropriate investigation.

For larger premises, a separate record for each refrigeration unit may be easier to manage. Where food is moved, quarantined or discarded, the business should also retain relevant information about the affected stock and the decision made. Paper logs are perfectly acceptable as part of a food safety management system when they are completed accurately, kept accessible and reviewed appropriately.

Electronic spreadsheets can also be useful, provided they remain available during the incident and are not dependent on the same affected systems.

What Happens if a Fridge Temperature Rises Above Safe Limits?

A refrigeration failure does not automatically mean that every product must be discarded. However, businesses must be able to establish whether food has remained safe. The appropriate response depends on several factors, including the actual food temperature, the duration of exposure, the type of food and any applicable time or temperature allowances. A single temperature reading cannot necessarily establish how long food has been outside its required storage conditions.

Example: A fridge reading of 10°C at opening does not reveal whether the temperature increased five minutes earlier or remained elevated throughout the night. This uncertainty is particularly important where automated records have been lost.

The business should assess the affected food, establish the available temperature history, check product temperatures where appropriate and follow its documented corrective action procedures. Food should not be returned to sale simply because the fridge has subsequently cooled down. Where the safety of affected food cannot be established, it must not be supplied for consumption. Businesses should seek advice from their food safety manager, technical team or relevant local authority where necessary.

Checking Thermometers and Maintaining Reliable Records

Manual monitoring is only useful if the measuring equipment is suitable and working correctly. Thermometers should be checked for accuracy at appropriate intervals and maintained in accordance with the manufacturer's instructions. The FSA describes simple ice-water and boiling-water checks as ways to assess probe thermometer performance, although the suitability of these methods depends on the instrument and the conditions.

For businesses requiring greater accuracy or traceability, calibrated instruments and documented calibration procedures may be appropriate. Staff should also understand how to use the equipment correctly. Common problems include recording a fridge's set temperature rather than its actual temperature, failing to allow a thermometer reading to stabilise and using an infrared thermometer as though it measures the centre of a food product.

Records should be reviewed by a responsible person, particularly during an extended period of manual monitoring. A complete set of temperature readings is valuable, but it is the combination of reliable measurements, suitable limits, investigation and corrective action that makes the procedure effective.

Preparing for Future Refrigeration and Monitoring Failures

The recent cyberattacks demonstrate that refrigeration contingency planning should not be limited to power cuts and mechanical breakdowns. Connected systems can also become unavailable because of cybersecurity incidents, network outages, software failures or planned security maintenance.

Food businesses should understand which refrigeration functions depend on internet access and what happens if that connection is removed. They should also establish whether local alarms continue operating, whether historical temperature data remains accessible and whether an independent monitoring method is available.

For larger operations, this may involve maintaining spare thermometers, standalone data loggers, printed recording sheets and clearly documented staff responsibilities. Smaller businesses may be able to implement a simpler procedure using a reliable fridge thermometer, a suitable probe and a daily temperature record, with additional checks during periods of increased risk.

Cybersecurity precautions remain important. Refrigeration controllers should be secured and maintained in accordance with manufacturer and cybersecurity guidance, with appropriate controls over remote access. Manual monitoring is a contingency measure, not a replacement for securing vulnerable equipment.

Reliable Temperature Monitoring Remains a Fundamental Food Safety Control

The European refrigeration cyberattacks have highlighted a risk that many food businesses may not previously have considered. As refrigeration systems become more connected, the availability and integrity of digital temperature information become increasingly important.

For businesses that have temporarily disconnected monitoring equipment, the immediate priority is to establish a dependable alternative that provides meaningful temperature checks and reliable records. A combination of independent thermometers, appropriate product-temperature checks, standalone data loggers where needed and properly maintained temperature logs can help businesses continue managing their cold chain.

Temperature Monitoring Equipment for Food Businesses

Food Safety Direct supplies temperature monitoring equipment for commercial food operations, including digital probe thermometers, fridge and freezer thermometers and temperature logging solutions.

The right equipment depends on the refrigeration system, the products being stored and the level of monitoring required.

The wider lesson is straightforward: food businesses should be able to verify that their refrigeration is operating safely, even when the connected monitoring system is not.

Sources and Further Reading

Leave a comment

Please note: comments must be approved before they are published.