The FM10 thermometer is water-resistant, can display temperature in either °C or °F and features a data hold function.

Specification

Range: -50°C to 150°C/-58°F to 300°F
Resolution: 0.1°C or 0.1°F
Accuracy: ±1°C or ±2°F
Battery: 1.5v button
Warranty: 3 months

The FM20 thermometer can display temperature in either °C or °F and features a data hold function. The power automatically switches off when the probe is folded into place. The probe is held in position by a ratchet mechanism.

Specification

Range: -50°C to 220°C/-58°F to 428°F
Resolution: 0.1ºC (-50ºC to 199ºC), 0.1ºF (-58ºF to 199ºF)
Accuracy: ±0.5ºC, ±1 digit (-20ºC to 90ºC), ± 0.8ºF, ±1 digit (-4ºF to 194ºF)
Probe: folding, 110mm x 3mm diameter
Battery: 1.5v AA
Battery life: approx 3000 hours
Warranty: instrument 1 year, probe 3 months

The FM35 is a digital hand-held thermometer with interchangeable probe, protective rubber boot and Lumberg connector. It is simple to use and its large LCD and quick response time allow temperatures to be viewed quickly and easily. It is supplied with a general-purpose penetration probe.

Supplied complete with high quality penetration probe and protective rubber boot.

Specification

Manufacturer/supplier: Digitron
Range: -40°C to +110°C
Supplied probe type: Penetration probe with lumberg plug and standard wire connection
Accuracy: ±0.5°C (-0 to +70°C)
Battery: 9 volt PP3
Battery life: 3000 hours
Sensor type: -
Display: LCD
Weight: -
Dimensions: -
Code: FM35

Additional Probes and Test Caps are available for this thermometer. Please click here for details and to order.

The Digitron FM25 allows the user to check the internal temperature of a fridge and feezer without opening the doors. Unlike our other digital fridge thermometers it doesn't use wires to connect the sensor which is inside the fridge and freezer cabinets to the display which is sited outside.

The temperatures from the remote RF sensors which are sited inside your fridge or freezer are transmitted wirelessly and displayed on the base station. The display can be attached using the magnet to the cabinet or free standing using the fold away bracket.

The temperature on the display is updated every 8 minutes.

An audible and visual alarm is set off when temperature inside the fridge or freezer exceeds a pre-set maximum and minimum temperature. In order to prevent the alarm going off every time the cabinet door is opened the alarm only triggers after the maximum or minimum temperature has been exceeded for 15mins.

The clear digital display shows the temperature of both a fridge and a freezer at the same time - no buttons to press to switch between one and the other!

The temperature can be displayed in either °C or °F - set by the user.

The remote sensors can be attached inside the fridge or freezer using spring action clips or by using the suction cups supplied.

The FM25 also has a low battery indicator feature.

Please note: Batteries are not supplied with this instrument. Requires 2 x AAA Alkaline batteries for the base station. The sensors use 2 x AA batteries. Lithium batteries are recommended for the freezer sensor as they perform better at very low temperatures.



Specification

Manufacturer/supplier: Digitron
Range: -30°C to +40°C
Supplied probe type: 2 x wireless sensors
Accuracy: Battery: Base Station - 2 x AAA Alkaline, Sensors 2 x AA Alkaline
Display: Dual Custom LCD
Weight: Base Station - 137grams Sensor - 92grams
Dimensions: Base Station - 150 x 59 x 27mm, Sensor - 105 x 35 x 18mm

The easy to use, low cost TBS1 has been designed to allow on-site system calibration checks throughout the food industry on any thermistor; platinum or thermocouple based instrument. The unit can be supplied with a UKAS traceable certificate to ensure compliance with ISO9001 procedures. For ease of use, the system is also light and compact.

Accuracy and reliability

The TBS1 has an excellent system accuracy of ±0.2% of ±0.1°C/0.2°F reading.

Checking instrument accuracy is often a time consuming and skilled process. The TBSI allows the operator to check system accuracy simply, easily and as often as required at his or her own premises.

Ease of use

Any member of staff who uses a thermometer may test and sign for the instrument even on a daily basis.