ETI dataloggers

The new ThermaData loggers are housed in a waterproof, ergonomic case that is designed to meet IP66/67 protection.

Each logger incorporates a red and green LED, the flashing green LED indicates that the logger is active/logging and the flashing red LED indicates that your customised pre-set alarms have been exceeded.

Communications are via a USB cradle that is supplied with the ThermaData Software. Please note: when ordering loggers it is necessary to order at least one ThermaData logger cradle.

Specification

Range: -40 to +85°C
Resolution: 0.1°C
Accuracy: ± 0.5°C
Memory: 4000 readings
Sample rate: 0.1 minute to 255 minutes
Battery & battery life: 3.6 volt lithium - 2 years continuous use
Display: 2 LEDs
Dimensions: 76 x 23mm
Weight: 82 grams

Datalogger as featured above but with the addition of a LCD display.

Specification

Range: -40 to +85°C
Resolution: 0.1°C
Accuracy: ± 0.5°C
Memory: 4000 readings
Sample rate: 0.1 minute to 255 minutes
Battery & battery life: 3.6 volt lithium - 2 years continuous use
Display: 10mm LCD with 2 LEDs (function in ambient -30 to +85°C)
Dimensions: 76 x 23mm
Weight: 91 grams

The ThermaData logger Mk ll series consists of a comprehensive range of portable data-loggers utilising the latest in electronic technology. The ThermaData loggers are housed in a waterproof, ergonomic case that is designed to meet IP66/67 protection.

* waterproof housing - IP66/67 protection
* designed to meet EN 12830, S & T, C & D, 1
* temperature range -40 to +85°C/+125°C
* high resolution 0.1°C, high accuracy ±0.5°C

Specification

Range: -40 to +125°C
Resolution: 0.1°C
Accuracy: ± 0.5°C
Memory: 4000 readings
Sample rate: 0.1 minute to 255 minutes
Battery & battery life: 3.6 volt lithium - 2 years continuous use
Display: 10mm LCD with 2 LEDs
Dimensions: 76 x 23mm
Weight: 102 grams

The ThermaData logger Mk ll series consists of a comprehensive range of portable data-loggers utilising the latest in electronic technology. The ThermaData loggers are housed in a waterproof, ergonomic case that is designed to meet IP66/67 protection.

* waterproof housing - IP66/67 protection
* designed to meet EN 12830, S & T, C & D, 1
* temperature range -40 to +85°C/+125°C
* high resolution 0.1°C, high accuracy ±0.5°C

Specification

Range: -40 to +125°C
Resolution: 0.1°C
Accuracy: ± 0.5°C
Memory: 2 x 2,000 readings
Sample rate: 0.1 minute to 255 minutes
Battery & battery life: 3.6 volt lithium - 2 years continuous use
Display: 10mm LCD with 2 LEDs
Dimensions: 76 x 23mm
Weight: 113 grams

The sofware for the Therma data loggers has the ability to display two traces on a graph, the trace colours are user selectable, all files can be viewed as thumbnail icons for easy identification.

The software is backward compatible, therefore will work equally as well with the older style ThermaData loggers as well as the new MK ll models. The software is both powerful and sophisticated, yet user-friendly enabling temperature data to be organised and analysed to provide management information.

It allows the user to programme the logging sample/interval rate (0.1 to 255 minutes), the real-time clock, °C or °F, delayed start (maximum 23 hours, 59 minutes) or select a magnetic start option. It is also possible to include a 32-character user ID for each logger.

By selecting continuous logging in the software options, it is possible to start the ThermaData logger only once and never have to reset its parameters again, even if downloaded regularly. Unlike most low cost loggers, the ThermaData logger will continue recording during and after downloading the data.

The ThermaData logger MkII software is supplied with a cradle and start magnet. Each USB cradle is supplied with one metre PVC lead. Please note: when ordering loggers it is necessary to order at least one ThermaData logger cradle.